Continuing on the success of the Wired Magazine App for iPad released in May, Adobe plans to make the tools used to create that publication/App available to the general public later this summer. Check out more details here and here.
Continuing on the success of the Wired Magazine App for iPad released in May, Adobe plans to make the tools used to create that publication/App available to the general public later this summer. Check out more details here and here.

With the introduction of the iPad WiFi+3G and now the iPhone 4, one thing as a gadget guy that has become more challenging is moving my SIM cards around between devices. As I test various devices whether they be 3G MiFi devices, 3G USB data cards, iPhones or Androids, I want to be able to simply use the same wireless accounts and go back and forth as I please. After all that is the advantage of GSM devices over CDMA. However, the iPad and iPhone kinda screw that up because they use MicroSIMs and all my other devices use full size SIM cards. The good news is that technically there is no difference between the SIM and the MicroSIM other than the physical plastic around it. The pin layout and contacts are the same.
Since a MicroSIM is nothing more than a regular SIM card with the excess plastic cut away, I ordered a Cut My SIM MicroSIM cutter. The device resembles a hole punch and you just insert full size SIM in, press down and out pops a microSIM from the bottom. They even provide two SIM converters to use in case you ever wanted to put your MicroSIM back into a device that uses full size SIM cards. Since I didn't want to risk screwing up a working SIM card, I first tried it on that had been deactivated. I cut it, popped it back in the converter and put it back in the phone and although it wasn't an active number, the phone did recognize it as a SIM card again. Next I tried it with the SIM card from my iPhone 3GS and put the newly cut down MicroSIM in my iPhone 4. No problem! It works! Later this summer when I test the Android phones (and maybe the tablets) it will be great just using the same SIM/MicroSIM card to go back and forth between the two devices.
You can get Cut My SIM here from their site. ($25) Due to the heavy demand, there will likely be a delay before yours ships.
If you're starting out with a MicroSIM and just want to go to a regular SIM size using the converter trays, you can get those here.
Anyone that knows me, knows how much I detest waiting in long lines. I absolutely refuse to wait for hours in lines for gadget purchases. That's not to say that I haven't stood in a line to purchase something, but I certainly avoid it at all costs. With all the iDevice craziness out there and the fact that in most cases you can pre-order the gadget and have it sent directly to your home, I really don't get why anyone would wait in a line (especially overnight)? Also in many cases, if you're willing to wait a few hours, few days or a couple of weeks you can just walk right in and up to the counter and buy one. This coupled with the lack of acceptance of cash for many of these iDevice purchases really leaves me scratching my head.
This video really puts it in context: Happy Friday Everyone – have a great weekend!
You can grab this entire episode (Attack of the Killer App) here:
Hilarious!
I'm such a tease. I know.
Although that is Lightroom 3 being displayed on my iPad, it's actually running on my MacBook Pro. Check out how I did it here. I know it's not what you were hoping for, but it's pretty useful nonetheless. Also great for wireless client review in your studio.

It seemed like only last week when I shared my 1st month of iPad data use with you all. I started out with the 250MB/month iPad plan knowing that I could always upgrade to the unlimited data plan if I needed to. Now it looks as if the unlimited plan is going away unless you act TODAY! Starting today, AT&T will start NEW data plans for ALL Smart phone devices (including iPad/iPhone). So if you already bought an iPad 3G and thought that you might some day want to go "UNLIMITED" for $29.99/month, then you better do it now, because starting today that plan goes away for NEW subscribers. Here's the break down:
| The OLD Plans (prior to 6/7/2010) | iPad – 250 MB/month $14.99/month | Unlimited Data Plan $29.99/month |
| The OLD iPhone Plans | iPhone 2G UNLIMITED+200 SMS Data $20/month | iPhone 3G/3GS Unlimited Data $30/month (+$5/month for 200 SMS) |
| The NEW Data Plans starting TODAY for NEW accounts (iPhones too) | DataPlus 200MB/month $15/month | DataPro 2GB/month $25/month |
| Tethering your SmartPhone (iPhone with 4.0 software) | DataPro plan $25 + Tethering $20 = $45/month |
While the prices are technically cheaper, Unlimited goes away! 2GB's sounds like a lot and it probably is for MOST people, but if you plan to stream video on your device 2GB in a month can be eaten up pretty quickly. These new plans now make it so that you have to monitor your usage closely. Luckily if you do go over, you're not charged a per kilobyte fee. Instead you'll be able to add on another block of usage for a set price (another 200MB for $15 or if you're on the DataPro plan you get another 1GB for $10). So again if you do a lot of streaming, your bill could be quite high. I should also mention that all of these NEW plans do come with FREE access to any AT&T WiFi hotspots.
No iPad to iPhone tethering, yet – According to AT&T, they have no problem with you tethering your iPad to your iPhone to share the iPhone's data connection. However, currently the iPad doesn't support it in it's OS and Apple says that the 4.0 OS update isn't coming to the iPad until the fall. So we may have to wait til then to see if the iPad will tether to the iPhone.
See the AT&T Plan details here on their site.
Although you can look this info up on your device, I find the most accurate way is to dial *3282# from your phone and you'll get a text message with the break down of your current usage.

Maybe you won't, but here's some food for thought. If you're just doing normal surfing, email, etc. then you're probably fine. However, let's not forget that iTunes sells and rents MOVIES! The average movie size is 1.5GB. So if you rent a movie over 3G, you could quickly hit the limit of the DataPro plan and then start having to pay for additional 1GB blocks at $10 a pop before your next billing cycle. I know it's easy to say, "well don't do that. Download your movies while you're on WiFi." However, this wasn't an issue yesterday and now somehow makes the mobile platforms seem a little less fun.

When I got my iPad WiFi+3G back on April 30th, I resisted signing up for the Unlimited 3G Data Plan ($29.99/month). Since there is no contract and you can upgrade or downgrade at any time I wanted to see if I could get by on the 250MB/month Plan ($14.99/month). My thought was "why pay more up front when you're not sure how much you're really going to use?". I was right! In the first month I used my iPad as much as I needed to/wanted to on 3G. The rest of the time I was on WiFi or traveling abroad and using it on WiFi. I only used 171MB in the first month. So technically I saved $14.99 by NOT doing the impulse thing and signing up for the Unlimited Plan right off the bat. Now that's not to say that I wan't have some months where I need more 3G data and if I do, I'll purchase more at that time. However, today I feel like I just saved $14.99 by not giving it to AT&T up front.

All I'll say is check out this App that I reviewed on Best App Site today.

When the Apple iPad WiFi model shipped I did a pretty in-depth review of it, which you can see here. Therefore the purpose of today's review is focus primarily on the 3G capabilities. (and yes that's a custom Gelaskin on the back because that's just how I roll
)
I had planned all along to go with the 16GB WiFi model for testing and reviewing and then get the 64GB WiFi+3G model for my own use. That's exactly what I did. Although I don't "need" 64GB's of space for my info and media content, I do plan to use the iPad for field backup of my photos and instant touch up and sharing using the iPad Camera Connection Kit. I typically shoot to either 8GB or 16GB memory cards and almost never fill them up in one day. After loading everything on the iPad that I wanted to have on it (including a couple of movies), I still had over 32GBs of free space. That will be plenty for photo backup each day of shooting. My wife claimed the 16GB WiFi version in case you were wondering.

Not much. The only two visual differences on the outer case are the black bar across the top for the antennas/GPS support and the MicroSIM tray on the left side. Otherwise it's visually identical to the WiFi model.
The obvious and biggest difference on the inside is that the WiFi+3G models include 3G wireless technology to allow you to connect to the internet pretty much anywhere there is GSM cell service. The other difference is that these models also include a real GPS chip. So while the WiFi mode can detect your location based on available WiFi signals, the WiFi+3G model can do so based on GPS satellites, cell towers AND WiFi signals. This also means that it's capable of running turn-by-turn GPS navigation apps although it may be a bit conspicuous on your dashboard.
As a photographer one of the iPad accessories I was most anticipating was the iPad Camera Connection Kit. This kit consists of TWO adapters that connect right to the iPad's Dock connector. The first one is a standard SD (SDHC) Memory Card reader. You connect it to your iPad and then insert a memory card with images/videos on it and transfer those images to your iPad. No software to install because the iPad already has this ability built-in to the Photos App. The second adapter has a standard USB port on the oppositie end of the Dock connector. With this one you can not only connect your camera via USB and transfer images directly, but as my video above shows you can even use a Card Reader with it! This overcomes (although not as elegantly) the problem of wanting to use Compact Flash or other card formats.

These are exciting times in the publishing industry! The tools have never been better to get your word out. With the introduction of Adobe Creative Suite 5 and in particular InDesign CS5, my head is spinning thinking about all the possibilities. I can use one industry standard app to publish for Print, for the Web with NEW Interactive features and now more easily than ever to standard eBook Reader formats such as ePUB. There's also a lot of excitement around the Apple iPad. The beauty here is that I can use my new found publishing power and Apple's popular device to get my content in front of more eyeballs than ever.
As you may know I co-authored one of the best selling books for the iPhone, "The iPhone Book". I've been very happy with the success of that book and of course as soon as the iPad was introduced, many eyes turned towards me to question if I was going to write a book for this new device. While the project seemed interesting (and still is), I wanted to try something a little different this time around. I wanted the iPad Book to be an iBook on the actual iPad. All of my books are already being laid out in Adobe InDesign. So there's nothing new there, except there is something new there in terms of capabilities. The enhanced capabilities around the ePUB format and Interactive Document publishing beyond PDF. So I wanted to do two things: I wanted to get a sample out there of what an iPad book on the iPad and I wanted to experience first hand what it was like to create one from scratch using InDesign CS5. So I enlisted the help of my colleague at Adobe, Colin Fleming (eBOOK guru) and Colin gave me the inside scope and even some sample demo documents that he had put together. This was a great jump start and helped me avoid some stumbling blocks. Yesterday, I started my sample "25 iPad Tips" and today I have a FREE iBook that you can download right here.
The iBooks App on the iPad reads standard ePUB documents and Adobe InDesign CS5 just so happens to export them out directly. Great! There are some limitations that you have to be mindful in your document itself. These are limitations on the standard more so than of InDesign. For example, InDesign is an amazingly powerful page layout application that pretty much allows you do do anything you want on the page. However, ePUB has limitations on how the content has to flow to make it possible to have this single document on a multitude of different devices. I recorded this video to walk you through some of those things to look out for:
The first step is to download my ePUB file here. Once you download the ZIP file, unzip it and you'll have a short readme.txt file and the actual "25 iPad Tips.epub" document. Open iTunes 9.1 and higher and simply drag the ePUB into the Library area of iTunes on the left side. It should now appear in the Books Area of iTunes and once you plug in your iPad via the USB cable, you can select it as a book to sync in the Books Tab in iTunes. Enjoy!
